Precision Measurement For Heavy Weights

Millimetres can make all the difference when it comes to the stability of cranes and lifting platforms. When safety is jeopardized, cranes can tilt or even topple over. If loads are lifted unevenly, this can result in strain and damage. What is needed in these cases are easily integrated measurement solutions with a good price-performance ratio and first-class product quality? SIKO has solved this task by developing the impressive SG 30 wire-actuated encoder with its extremely compact yet robust design and wide range of applications.

INSTROTECH is offering Siko innovative wire-actuated encoders for a wide spectrum of applications with measurement lengths ranging from 600 millimetres to 40 meters. The functional principle of the wire-actuated encoders is fairly simple: A measurement wire is wound onto a drum. When the wire is pulled out, it causes the drum to rotate. A sensor connected to the drum axle records this rotation and generates a measurement signal proportional to the wire movement of the drum, which indicates the position. 

When extending crane arms, exact position detection of the supports is essential to prevent the crane or truck from tilting or toppling over. This is done by measuring the current values of the extended supports and comparing them directly with the length of the extended crane arm. This means that complete extension of the crane arm is only possible if the supports are also extended to the maximum width.

Special case: lifting platforms

Wire-actuated encoders are not only used for cranes operating at great heights. Optimum precision is also needed when extra-long loads have to be lifted. Wire-actuated encoders ensure even lifting e.g. of trains, underground trains or trams using a lifting platform. Failure to observe this can cause strain, which can result in damage to the entire construction.

Space-saving and resistant to cold

A redundant system is often necessary for safety reasons and in space-constrained situations. With these precision requirements in mind, SIKO has developed the SG 30 wire-actuated encoder with its particularly slim, compact design. Despite its space-saving size and lightweight of approx. 500 grams, no compromises have been made with regard to stability. The outer housing is made of sturdy zinc die-casting and the spring housing of fiberglass-reinforced plastic.

Another unique feature of the SG 30 is its wide range of working temperatures, which enables it to be used from minus 40 to plus 80 degrees Celsius. Four lockable aeration holes are integrated to avoid condensation. The wire outlet has a special protective seal. The wire pullout is flexible so that 100 % alignment with the extension direction of the outlet is not necessary.

The SG 30 has a measurement range of up to 3,000 millimetres. A high degree of measurement accuracy over the whole measurement range is ensured by winding the wire on the drum in just a single layer. The SG 30 is ready for connecting encoder types CAN/CAN-Bus, MWI and MWU. One particular advantage offered by the standardized connection method is the Plug & Play system, which guarantees swift, easy installation and immediate use.

Contact INSTROTECH on 010 595 1831, sales@instrotech.co.za or www.instrotech.co.za, for more information on Siko’s SG30 Wire-actuated Encoder for crane arms and lifting platforms.

About The Author

Leave a Reply

Your email address will not be published. Required fields are marked *

3 × three =

seers cmp badge